Commercial Aluminium Loading Ramps (3T – 8T)

Engineered for Australian earthmovers and civil contractors. Built from high-tensile structural alloy with anti-slip flat rungs and heavy-duty locking pins. Certified for rubber tracks and pneumatic tyres.


Commercial-Grade Aluminium Loading Solutions in Australia

Welcome to the premier destination for high-strength, certified heavy duty aluminium loading ramps. Engineered specifically for professional contractors, civil plant operators, and the commercial transport sectors, our comprehensive range delivers the ultimate combination of structural integrity, site safety, and loading efficiency.

Every ramp in our collection is manufactured from high-grade structural aluminium alloy extrusions, delivering an exceptional strength-to-weight ratio for easy site setup and relentless daily durability. Featuring innovative high-traction flat rungs, secure full-width connection plates, and essential high-tensile safety pins, our loading ramps ensure zero slippage and absolute stability during critical tracking cycles.

Ramp Selection Guide: Compare Our Series

Use the comprehensive comparison table below to determine the ideal load capacity, deck width, and application profile for your commercial machinery setup:

RAMP SERIESLOAD CAPACITYRAMP WIDTHAVAILABLE LENGTHSBEST APPLICATIONS & MACHINERY
A SERIES
Lightweight Profile
3T – 6T
(Per Pair)
350mm
(Standard)
3.5m, 3.9m, 4.2mContractors, mini excavators, small bobcats, light commercial trailers. Exceptional strength-to-weight ratio.
B SERIES
Heavy Duty Profile
3T – 6T
(Per Pair)
350mm
(Standard)
2.5m, 3.0m, 3.5m, 3.7m, 3.9m, 4.2mCommercial fleets, heavy skid steers, mid-sized wheel loaders. Thick-wall extrusion for rigorous daily transport.
BB SERIES
Extra Wide Profile
7 Tonne
(Per Pair)
500mm
(Extra Wide)
3.3m, 3.5m, 3.7m, 3.9m, 4.2m, 4.5mOversized tracked equipment, broad-wheelbase machinery. Extended width prevents off-edge tracking errors.
D SERIES
Professional Plant
8 Tonne
(Per Pair)
350mm
(Standard)
3.9m, 4.2mCivil construction engineering, full-sized plant equipment, heavy industrial excavators. Maximum rigid zero-flex design.

Safety Notice & Track Compatibility

Please note that all A, B, BB, and D-Series loading ramps are exclusively optimized and certified for rubber-tracked machinery and pneumatic rubber tyres.

  • To preserve structural integrity and maintain strict site compliance, these aluminium ramps are not recommended for regular steel track applications.
  • Always secure the ramps with the supplied high-tensile safety pins into the trailer coaming rail before loading.
  • Always consult your equipment's operational axle load limits and match your trailer deck height before selecting a ramp length to guarantee a safe loading approach angle.

How to Calculate Required Loading Ramp Length

Australian site guidelines recommend a safe machinery loading angle of no more than 16.5° (1:3.5 gradient ratio) to avoid bottoming out or track slip during ascent. Use our interactive estimator below to calculate your required ramp length:

📐 Interactive Ramp Length Estimator

Enter your trailer or truck deck height to determine the recommended ramp length.

Standard 16.5° Incline (1:3.5)
mm

Vertical height from flat ground to trailer deck (typical plant trailer: 800mm – 1,000mm).

Minimum Required Ramp Length:
3.50 Metres
Suggested In-Stock Spec: 3.5m (Available in A, B & BB Series)

Standard Formula Reference: Calculations use the recognized Australian civil plant transport guideline of a maximum 16.5-degree incline (1:3.5 gradient ratio) for standard rubber-tracked and wheeled plant equipment.
Formula: Length (m) = Deck Height (mm) × 3.5 ÷ 1,000.

Disclaimer: This calculator provides theoretical estimations only. Machine ground clearance, approach angle, rear overhang, site ground slope, bucket/attachment placement, and manufacturer-specific loading protocols must be independently verified by the operator. Century Trailers accepts no liability for loading incidents, vehicle damage, or miscalculations resulting from the use of this tool. Always refer to your machinery operator manual and conduct on-site risk assessments prior to loading.

Queensland Direct Branches & Equipment Support

Inspect in-stock ramp inventory and arrange instant pickup from our 4 dedicated branches across Queensland:

Brisbane (Head Office):
706 Beaudesert Rd, Rocklea QLD 4106
Gold Coast:
Shed 2/328 Brisbane Rd, Arundel QLD 4214
Toowoomba:
1/54 Carrington Rd, Torrington QLD 4350
Caboolture:
9B/27 Lear Jet Dr, Caboolture QLD 4510

For technical recommendations or pair-weight assessments, call our engineering team on (07) 3195 0404.